Where is the float switch on an Asko dishwasher?
To locate the float assembly, remove the lower dishrack and look on the bottom of the dishwasher’s tub. Test the float by lifting it several times and letting it drop.
How do you test a dishwasher float switch?
Grasp the slip-on connectors and pull firmly to remove the wires from the switch. Do not pull on the wires themselves. You may want to use a pair of needle nose pliers to help you. Use your multitester to test the switch.
What happens when a dishwasher float doesn’t work?
The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher. The float in your dishwasher needs to be able to move up and down freely. If it should happen to get stuck, it could interfere with your dishwasher’s ability to fill and/or drain.
How do I force my Asko dishwasher to drain?
To initiate a manual drain, press and hold Start/Stop for 3 seconds.
What does dishwasher float switch do?
The float in your dishwasher makes sure that there isn’t too much water coming into the basin of your dishwasher. When water reaches the appropriate level, the float rises and stops the water intake valve from pumping more water into the basin.
How does dishwasher float switch work?
The dishwasher float switch monitors the amount of water in your appliance, ensuring it does not fill up with too much water. Once the float reaches a preset level, it switches off to prevent the dishwasher from creating a flood. But if the float is broken or stuck, it may not allow your unit to fill with water at all.
How do I remove a float switch?
The float switch may be held in place with two screws or a clip. It is also connected to the float assembly inside the tub. Either remove the screws or release the clip to detach the switch, and then disconnect it from the float.
Why is my ASKO dishwasher not turning on?
The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.