Do upgraded sway bar end links make a difference?
You won’t feel the difference. Adjustable droplinks are mainly used with coilovers when height is changed so you can adjust the swaybar preloads.
Do you have to grease MOOG sway bar links?
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation to fill the dust boot and lubricate the interface between the boot and mating part.
Do I need end links for sway bar?
You don’t “need” them but it helps to have them especially if you plan to corner balance the car. Having adjustable endlinks allows you to be able to take pre-load out of the bar. Personally if you’re near stock suspension I would run the stock endlinks.
Are MOOG sway bar bushings good?
Moog never disappoints when it comes to producing high-quality sway bar bushings. This particular pair is made from thermoplastic and is super easy to install. Because these sway bar bushings have a split center, they slide right over the sway bar and fit perfectly in a matter of seconds.
What do Swaybar Endlinks do?
Sway bar end links are the attachment points between a sway bar and suspension members. Also known as a stabilizer bar or anti-roll bar, the sway bar connects suspension components on either side of the car to minimize body leaning in turns.
What do upgraded sway bar end links do?
Sway bar end links are a great and inexpensive upgrade for two main reasons, they often come with stiffer or upgraded bushings or joints and the adjustable ones allow you to properly set the end link length to match your ride height after you lower the car.
How often to grease tie rod ends?
Grease Interval About every 4.5-5K or so – typically when we rotate the tires.
Does sway bar end link length matter?
The length only matters to the extent that it not cause the sway bar to hit anything when the suspension cycles.
How long should sway bar bushings last?
The rubber bushing is designed to last as long as the rubber hoses. However, the bushings are to last for about 14 years, but the environment and management will contribute to this factor.
Should you grease thermoplastic sway bar bushings?
Thermoplastic bushings should not be lubricated.