How do I fix the F70 code on my Whirlpool Duet dryer?

Table of Contents

If your Whirlpool dryer is throwing the F70 code, the problem could be with the User Interface Board or Main Control Board. To fix it, turn off the power supply and then turn it back on a minute later. If the problem persists, it could be a defective User Interface Board or Main Control Board.

How do I fix F70 error on Whirlpool washer?

Check the wire harness connections at the user interface board and the Central Control Unit. If the unit will run and rotate before the F70 displays usually indicates the user interface board will need to be replaced.

What does F70 mean on a Whirlpool Duet?

The F70 error on this model washer is a central control unit (CCU) heartbeat failure. This means there is communication loss from the central control unit and the user interface. The troubleshooting procedure for this error is to first check the wiring and connections between the main control and user interface.

How do you fix F70 error on dryer?

How to Fix Whirlpool Dryer F70 Error Code

What Does the F70 Error Code Mean?
Step 1 – Try to Reset Your Dryer.
Step 2 – Replace the User Interface Board.
Step 3 – Check the Control Board Connectors.
Step 4 – Replace the Main Control Board.

What does F70 mean on a Kenmore dryer?

Doug, F70 means check harness connections at the machine control and at the console electronics. If your connections are fine to the machine control board and the console electronics, then you may need to change the machine control board.

What does F70 mean on a Maytag dryer?

The F70 error code indicates a communication failure between the control boards. Something like this is usually caused by a loose harness or defective control. 1. Unplug the washer for 5 seconds and then wait another 30 seconds after you plug it back in order to re-sync the Machine Control to the UI.

How do I fix the F70 error on my dryer?

Do dryers have reset buttons?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

Why is my Whirlpool dryer not drying?

When clothes are too wet, drying can take longer or you’ll find your Whirlpool dryer not drying clothes in one cycle. Make sure you select a wash setting with a sufficient spin cycle to lessen the moisture on clothes before drying. If clothes remain too wet after being washed, your washer may require a repair.

What does error code F70 mean?

What Does the F70 Error Code Mean? The F70 Error Code means that the user interface board cannot communicate with the main control board. This means that when you try to set your dryer the main control board doesn’t get the message/signal, so your dryer won’t be able to work properly.

What does the F70 code mean on a whirlpool duet dryer?

What does the code f70 mean on a Whirlpool Duet dryer? Typically the F70 error indicates a communication error between the touchpanel /console controls and the main control board. Whether that’s because there’s an issue with one board or the other (sometimes both if there are updates), loose terminals, in extreme cases there might be an issue with the wiring harness.

What does F70 mean on Whirlpool washer?

What does error code F70 mean on Kenmore dryer?

The F70 error code indicates a loss of communication between the console panel and machine (main) control board. Disconnect the dryer cord from the power supply and remove the top panel and check for loose connections on each control board.