How do I identify a 429 SCJ?

You can find 4U and 4UA symbols all over the 429 cranks. It is likely you can find a Brinell test mark indicating the crankshaft has been rigorously tested for hardness under real-world conditions. SCJ crankshafts tend to come in softer than CJ or SCJ versions. A 2Y, 2YA, 2YAB, or 2YABC will fit the 460 crank.

How much is a 429 Cobra Jet worth?

What Is A 429 Super Cobra Jet Worth? Published by McNally on February 10, 2022. It is said that Hagerty’s valuation tool indicates the value of this Boss 429 at most $200,000. Any item with good or poor condition can sell for more than $140,000 regardless of condition.

Is the Ford 429 a good engine?

The 429 was well suited to a competition role thanks to its sizable bearings and semi-hemi combustion chamber (with angled valves canted into the head that allowed for a larger size), and even out of the box its advertised (read: underrated) 360hp made it a strong street contender.

What is the bore and stroke of a 429 Ford?

429 Cobra Jet Performance Specs

Horespower 370* @ 5400 RPM
Displacement 429 Cubic Inches (7.0L)
Compression Ratio 11.3:1
Bore 4.36 Inches
Stroke 3.59 Inches

What cars had a 429 SCJ?

Vehicles Found With “429 Ci/370 Hp Scj” as Engine

  • 1970 Ford. Torino GT 429 Super Cobra Jet.
  • 1970 Ford. Torino Cobra 429 Super Cobra Jet.
  • 1970 Mercury. Cyclone Spoiler 429 Super Cobra Jet.

How much is a 429 motor worth?

How Much Is A 429 Motor Worth? Hagerty’s valuation tool reports that the average value of a Boss 429 is $200,000.

How much is a 429 Ford engine worth?

How Much Is A 429 Engine Worth? A 429 with Hagerty’s valuation tool is valued on average at $20,000, based on their product comparison website.

How do I identify a Ford 429 engine?

The 429/460 block is identifiable by the casting number, C8VE, D0VE, and D1VE-A. You can also expect to see truck blocks with D7TE, D8TE, D9TE, and so on. All 1970 Super Cobra Jet blocks had four-bolt mains (three center mains) as did 1971-on Cobra Jet and Super Cobra Jet blocks.

What part is the 429 CJ/SCJ head?

The 429 CJ/SCJ head was Part #D0OE-6090-R. This photo shows a view of the combustion chambers. Top Side Intake Side

Can you put a 460 engine in a 429 SCJ?

Our completed 429 SCJ is quite stealthy with its hotter cam, Crane rocker arms, Pertronix ignition, and Holley HP carburetion. There’s so much you can do here. Opt for the stroke of a 460 for an easy increase in displacement and get all kinds of power your 429 doesn’t have.

How many cjrods are in a 429?

Rods These are 429 CJrods. The photo at right shows the special type of machining around the bolt head done to the DOOE (CJ) rods, which helped make them a little stronger. Intake Manifolds

Where do I find the serial number on a 429 block?

The serial number (aka partial VIN) is stamped on the rear face of the 429 block just below the driver’s side head. The first two and last six digits of the vehicle VIN (ex: 1F123456) are shown in the photos below. The first digit (“1”) denotes 1971, the second digit (“F”) is the Assembly Plant code.