How do you set the bell clock on a Chelsea ship?
To set the time, gently turn the minute hand clockwise to the correct time, stopping at each hour and half-hour point to allow the bells to strike their full count. Never move the hour hand manually — all adjustments should be done by carefully moving the minute hand.
How often do you wind a Chelsea ships bell clock?
once each week
1. Winding Wind fully once each week at approximately the same time. The right hand winding arbor (located at 4 o’clock) is for the time-side mainspring while the left hand arbor is for the strike side mainspring. Be sure to wind both, starting with the strike side.
How do you change the time on a Chelsea Clock?
If you have a Chelsea Clock Ship’s Bell or other mechanical clock, you can adjust the time by placing the black “stop” plug into the key wind hole to stop the clock for one hour, and then remove it. If you own a pendulum clock, simply stop the pendulum for one hour and then restart it.
How does a ship’s clock chime?
The watch officer struck the ship’s bell every half-hour to apprise the crew of the time. A single bell denoted the end of the first half-hour, and one bell was added each half-hour. Eight bells, therefore, signaled the end of each four-hour watch.
Where is the serial number on a Chelsea Clock?
Find the serial number on the back of the case. Record the serial number and type of clock. The company’s website at chelseaclock.com lets visitors know that “Each clock is individually numbered and then registered prior to leaving the factory.
Can you Overwind a Chelsea Clock?
10. Is it possible to over wind my clock? No, it is not possible to over wind your Ship’s Bell or Shipstrike Clock. An under wound clock will sometimes have an inconsistent chime or may not keep accurate time.
How does a ship’s clock work?
Ship’s bell time originated in sailing ship days, when the crew of a vessel was divided into Port and Starboard Watches, each on duty four hours, then off four hours. One stroke of the ship’s bell indicates the first half hour of the watch. Then an additional bell is struck for each succeeding half hour.
How do I fix overwound clock spring?
Fixing An Overwound Clock
- Clean The Clock. Sometimes cleaning your clock will get it working again.
- Lubricate The Mechanism. Like cars, all mechanical clocks need regular oiling.
- Replace The Springs.
- Find A Professional.
What kind of oil do you use on a clock?
Synthetic clock oil is not cheap because it is specifically formulated for the metals used in clocks. Brass and steel are used in clocks because when properly lubricated with the right oil it forms a perfect bearing.
How do you wind a Chelsea ship bell clock?
Instructions for Chelsea Ship’s Bell Clocks 1.11..1. WindingWinding Wind fully once each week at approximately the same time. The right hand winding arbor (located at 4 o’clock) is for the time-side mainspring while the left hand arbor is for the strike side mainspring. Be sure to wind both, starting with the strike side.
Where is the Chelsea Clock made?
Since 1900, Chelsea Clock has been known for the Ship’s Bell timepiece collection. Every Ship’s Bell clock is made and assembled by hand at our factory in Chelsea, Massachusetts.
Why are there 8 bells on a ship?
The watch officer struck the ship’s bell every half-hour to apprise the crew of the time. A single bell denoted the end of the first half-hour, and one bell was added each half-hour. Eight bells, therefore, signaled the end of each four-hour watch.
How long does it take to make a timepiece?
It takes up to four weeks to craft each timepiece, They are made with over seven pounds of solid brass and more than 290 precision parts (including gears, pins, plates, and screws) as well as our patented 11-jewel movement.