How much chlorine is needed to shock a pool?
Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.
How much shock do I add to my pool?
Light Green or Teal Pool Water: In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock.
How much chlorine do you put in a pool per gallon?
The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.
How much shock do I need for a 1000 gallon pool?
Answer: The best thing to do is to take the reading for free chlorine first; then you can use pool calculator to find the amount of chlorine to add. Your free chlorine should always read 3 ppm. A 1000 gallon pool may just need 0.13 ounces or a little higher.
Do you run the filter when you shock a pool?
Running your filter after shocking your pool is a must and is just as important to your pool as shocking it is. Be sure to run your filter for at least 6 hours, but shoot for 24 hours to several days, if your pool is particularly dirty or has algae, to properly circulate the chlorine and clean the water.
Is pool shock same as chlorine?
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
Is pool shock the same as chlorine?
Do Bestway Pools need chlorine?
Chlorine is used to disinfect the pool water and keep it free from bacteria so it’s safe to swim in. For Bestway pools, it’s recommended you use either a chlorine or bromine water sanitiser over non-chlorine alternatives. Make sure you check the instructions on the sanitiser thoroughly before use.
Is liquid chlorine the same as shock?
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Can you over shock a pool?
Can you put too much shock in a pool? SKIMMER NOTES: It’s unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you’re safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
Why did my pool turn brown after I shocked it?
Brown pool water is often caused by metals (iron) becoming oxidized in the pool water. If you shocked your pool water and it turned brown you probably have metals. Oxidized iron usually turns a brown or rusty color in the water.
Should I brush pool before shocking?
Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you’ve done this, it is important to make sure you have the proper pH level in your water.