How wide is a 57 Chevy rearend?
How wide is a 55 Chevy?
| Exterior | |
|---|---|
| Length : | 195.6 in | 4968 mm. |
| Width : | 73.0 in | 1854 mm. |
| Height : | 59.0 in | 1499 mm. |
| Wheelbase : | 115.0 in | 2921 mm. |
How wide is a Chevy rear end?
MEASURED ACROSS WHEEL MOUNTING SURFACE
| Year | Classic Vehicles | Width Rear |
|---|---|---|
| 55-64 | Chevy car | |
| 65-67 | Nova | |
| 68-72 | Nova | 60″ |
| 78 & up | Monte Carlo, Regal, etc. with 10 bolt axle | 58″ |
What rear end came in a 57 Chevy?
Automatic 57 cars (both 6 and V8) came with 14inch tires and 3:36 rear gears. Stick shift 57 cars came with 14 inch tires and 3:55 gears.
How wide is a 55 Chevy rearend?
Just measured one and it’s just shy of 60″.
How wide is a 1955 Chevy truck rear end?
The 55-57 Chevy car rearend is almost a bolt in, the perches need to be relocated to the top of the housing though. It has the 4.75″ bolt pattern, and ratios are usually 3.55-3.73, but sometimes you’ll find a 3.36. The 78-88 mid size GM cars use a 7.5″ 10 bolt, which is about 58/5″ wide.
How wide is a 12 bolt Chevy rear end?
10-15/16-inches wide
The rearend cover on passenger car 12-bolt rearends is oval, measuring 10-15/16-inches wide by 10-5/8-inches tall.
How wide is a 62 Nova rear end?
It measures 53″ from the outside of the brake backing plates. Two drums would add aprox. 5″.
What rear end came in a 55 Chevy?
Most all 1955 Chevy 1/2 ton pickups came with a 3.90 rear end ratio.
What is the gear ratio on a 1957 Chevy Bel Air?
According to Classic Chevy’s Judging Guidlines Manual, Code AB on a 57 rear end is a 3.36:1.
How wide is a 8.8 rear end?
8 rear end width iS59 11/44 inches. The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in the model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle.