What does ASTM F2892 11 EH mean?
electrical hazard protection
the rectangle used in safety toe footwear — that will include ASTM F2892-11 and any standard feature. designation that the footwear meets, ie. EH = electrical hazard protection (18Kv), SD = static dissipating. or PR = puncture resistant. As a customer, you will now know that your Thorogood soft toe footwear.
What does ASTM F2892 mean?
ASTM F2892 is the Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe).
What is the ASTM standard for footwear?
ASTM F2413-18
ASTM F2413-18 is a standard that covers footwear constructed and manufactured such that the protective toe cap is an integral and permanent part of the footwear. The standard contains requirements to evaluate the performance of footwear for: Impact resistance.
What are ASTM F2892 18 eh?
ASTM F2892-18 – Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
What makes a boot eh rated?
The idea behind these EH rated safety boots is pretty simple, the entire surface of the boot is made from non-conductive materials and as a result no electrical charge will pass through the body, because you are fully isolated from the ground.
What is the difference between ASTM F2413 11 and ASTM F2413 18?
The difference between ASTM F2413-11 and ASTM F2413-18 is how the information was displayed in the label. In the 2018 update the marking must be enclosed in a rectangular border and a four-line format is suggested. It contains the next points: Line 1 – identifies compliance with ASTM F2413 standard.
What is ASTM F2412?
The ASTM F2412 test methods measure resistance of footwear to hazards that may result in injury to the worker. These methods may be used to test for compliance to minimum performance requirements in established safety standards.
What is ASTM F2413-11 certification?
ASTM F2413-11: Standard specification for performance requirements for protective (safety) toecap footwear. ASTM F2413-11 Standard specification for performance requirements for protective (safety) toecap footwear replaces the former ANSI Z41 standard, which was withdrawn in 2005.
What rating is steel toe?
Testing is done to determine the impact rating by dropping a weight from a certain height at a specified speed onto the boots. If the boots can withstand the 75 pound weight, they’re labeled as I/75. The minimum impact rating for safety toe boots is I/50.
How do I know if my shoes are eh rated?
Check the label, typically sewn onto the tongue of the shoe and look for the ASTM F2413-11 (EH) rating.
Is 15298 a standard?
This standard was first published in 2002 which was identical to ISO 8782-1 : 1998 ‘Safety, protective and occupational footwear for professional use — Part 1: Requirements and test methods’ which has been superseded by ISO 20344 : 2004. The committee has decided to revise this standard by adopting ISO 20344 : 2004.
What does ASTM F2413-18 MIC mean?
ASTM F2413-18 defines the minimum requirements performance footwear must have in order to provide protection against a variety of workplace hazards.