What is BS EN ISO 14971 2019+A11 2021?
BS EN ISO 14971:2019+A11:2021 – Medical devices. Application of risk management to medical devices (British Standard) Medical devices. Application of risk management to medical devices (British Standard)
What is the main body of BS EN/IEC 62305-1?
The main body of this part of the standard gives guidance on the design of an external Lightning Protection System (LPS), internal LPS and maintenance and inspection programmes. BS EN/IEC 62305-1 has defined four Lightning Protection Levels (LPLs) based on the probable minimum and maximum lightning currents.
What are enhanced SPDs (SPD) under BS EN 62305?
BS EN 62305 therefore considers the use of enhanced SPDs (SPD*) that further reduce the risk of damage and malfunction to critical equipment where continuous operation is required. Installers will therefore need to be much more aware of the application and installation requirements of SPDs than perhaps they may have been previously.
What is the single risk assessment in BS EN/IEC 62305?
However, the single risk assessment in BS EN/IEC 62305 dictates whether structural and/or LEMP protection is required hence structural lightning protection cannot now be considered in isolation from transient overvoltage protection – known as Surge Protective Devices (SPDs) within this new standard.
What is en 10365 British Standard?
This British Standard is the UK implementation of EN 10365:2017. It supersedes BS 4-1:2005 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/103, Structural Steels Other Than Reinforcements. A list of organizations represented on this committee can be obtained on request to its secretary.
What edition of en 10024/10025-1 applies for undated references?
For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10024, Hot rolled taper flange I sections – Tolerances on shape and dimensions EN 10025-1, Hot rolled products of structural steels – Part 1: General technical delivery conditions
What is the BS EN 508-1-2000 gas cock regulations?
Any gas cock or tap shall be designed, identified or positioned to avoid inadvertent operation but shall be easy to operate when required. It shall be so designed that… BS EN 508-1-2000 pdf download.Multilayer coated steel sheet.