What is water-based resist used for?
Removable Water-based Resist keeps the silk completely soft to the touch and allows artists to create layered designs, as in batik. It holds a crisp line without spreading and does not shrink or pucker when dry. Removable Water-based Resist may be tinted with any water-based dye for colored lines.
How do you use jacquard resist?
Always paint the dye or paint on after the resist is dry. Never submerge in a dye bath. Removable Resist may be tinted with any water-based dye for colored lines and is screenable, odorless, alcohol-free and non-toxic….Replaces Clear Water Based Resist.
| Product Details | List Price | 1+ |
|---|---|---|
| 32 oz (quart) | $29.99 | $19.95 |
How do you make silk paint resistant?
If you prefer to ‘free-style’ silk paint, the resist can be used as a primer to inhibit the flow of the paint or dye. Dilute 1 part resist with 3 parts water and paint onto the fabric with a wide brush. Allow to dry. With smaller brushes, paint liquid dyes on top of this ‘stop-flow’ surface layering colours if desired.
How do you use Resistad?
Resistad is offered by Jacquard in a “Medium Viscosity” formulation that should be thinned with water or liquid dye to the desired consistency for the method of application. The recommended ratio for hand pipetting is 1:1 Resistad to water, but the ratio may be adjusted to taste.
How long does resist take to dry?
Pass the sponge with Fiebing’s Pro Resist over the leather surface until every spot is reached (the cavities too). Make sure you apply the product in a very thin coat, if possible. As soon as the finish is dry (that takes 3 hours at least) apply a further coat of Pro Resist.
How do I remove Gutta silk resistant?
After ironing or steaming setting, hold your silk under the running tap and gently squeeze the fabric until all remains of the resist have gone. Roll your silk in a towel and dab it dry. It’s as simple as that. If you are using any of the solvent-based guttas, then you will have to remove them via dry-cleaning.
What is gutta serti technique?
Silk Products. The Serti (closing or fence) technique is the silk painting technique where designs are outlined with gutta or water-based resists, which are applied to white silk that has been pre-washed, dried and stretched (on a stretcher).
What is resist in silk painting?
Basically, a resist is anything that prevents dye from reaching the fabric; it resists the dye. There are two major categories of resists commonly used for silk painting: Guttas and Water-soluble resists. Solvent based Gutta is a thick substance that is derived from Indonesian rubber trees (Gutta Percha).
What is Resistad?
Resistad is a concentrated, viscous water-based medium which can be used as a gutta resist in silk painting, or as a printing paste for screen printing, block printing, and stamping. Gutta resist made from Resistad produces a clean line that does not “feather” across the fibres in the silk fabric.
How do you use Jacquard without flow?
Apply No Flow with a brush or sponge to the entire area you wish to write on or paint. When dry, apply colors using the technique of your choice. Using No Flow for a signature or logo creates crisp, clear letters or images. After paint or dyes have been set, rinse No Flow out of fabric to restore original softness.
How do I uninstall gutta resist?
Gutta is an organic liquid latex and is not easy to remove from fabric. The best way is dry cleaning, but it might not remove it completely on the first cleaning. You can also try this: soaking the piece in naphtha, gutta solvent, gasoline or mineral spirits.