Why is my Brother printer not powering on?

Try to restore power to the machine Remove the power cord for at least 30 seconds. Press and hold the ON/OFF button down, and then insert the power cord back into the Brother machine. Do not release the ON/OFF button until the machine has been powered on completely or after 15 seconds.

Why did my Brother printer suddenly stop working?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. There are several basic troubleshooting steps you can take to resolve this issue.

How do I reset my Brother MFC printer?


  1. Press. [Settings]>[All Settings]>[Initial Setup]>[Reset].
  2. Press or. to display the type of reset functions, and then press the reset function you want to use.
  3. Press the option in the table to reboot the machine or to exit the process. Option.
  4. Press .

How do you fix a printer that wont turn on?

Unplug the printer and then reconnect the printer to reset the power module.

  1. Disconnect the power cord from the printer.
  2. Unplug the power cord from the wall outlet, power strip, or surge protector.
  3. After the printer has been disconnected for at least 60 seconds, reconnect the power cord to the printer.

How do I reset my Brother MFC j4510dw?

9 Answers

  1. Unplug the power cord from the printer.
  2. Remove the paper tray.
  3. Press and hold the Power button.
  4. While still holding the Power button plug in the power cord.
  5. Wait for it to start, when normal home screen displayed release the power button.
  6. There should be a message to replace the tray.

How do I reset my Brother mfc 7360N?

Reset the network settings to the factory default (video instructions available)

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  2. Press Menu.
  3. Press the Up or Down arrow key to choose Network Reset, and then press OK.
  4. The machine will re-start.

How do I reset my Brother MFC 7860DW printer?

Brother MFC7360N MFC7860DW Toner Counter Reset

  1. Open the front panel of your Brother MFC-7360N or MFC-7860DW Multifunction printer.
  2. Press the Clear/Back button. A display message will then show “REPLACE DRUM?
  3. Do not type 1 or 2, this is not the command you should enter.
  4. Close the front door.

Why does my Brother printer not print black?

This is due to several factors such as poor quality ink being used, tanks not being mixed often enough causing sediment to gather at the bottom of the tanks or not being used often enough. All of these factors can cause the black ink or the colours not to print.

How do I fix my Brother printer?

Simply work your way down the list until you find the one that works for you.

  1. Check the connection.
  2. Set your Brother printer as the default device.
  3. Restart the Print Spooler service.
  4. Update your printer driver.
  5. Clear the print queue.
  6. Check for damaged system files.
  7. Print from other programs.
  8. Factory reset your Brother printer.

How do I reset my Brother mfc 7360n?