How do you reset a Codelock?
How to Change Codelock 500 Code Guide
- Take your PushButton 500 lock off the door by unscrewing the 2 bolts in the backplate.
- Press the C button to reset the chamber and place the lock case on a flat surface with the buttons down.
- Remove the 4 red screws and carefully lift off the code chamber plate.
How do you change the code on a code lock?
How to Set a Combination Lock
- Pull up the shackle to unlock.
- Rotate the shackle 90 degrees counterclockwise and press down.
- Hold down and continue to turn the counterclockwise another 90 degrees.
- Set your own combination by turning the dials.
- Turn the shackle back as normal then the setting is complete.
How do you unlock a code lock?
KEY OVER-RIDE For the CL5000 and CL4000 the Key-in-Lever allows the lock to be opened for Security and Housekeeping Functions. Turn the key clockwise 90º and depress the lever handle to open the door.
How do I unlock a coded door lock?
Steps:
- Attempt to enter the correct code on the keypad.
- Look for the door’s bypass key.
- Contact the manufacturing company if you cannot remember your code.
- Input the new code given to you for confirmation.
- Pull the handle and attempt to open the door.
How do you unlock a 4 digit lock?
How to Unlock a Four-Number Combination Lock
- Step 1: Find your combo number.
- Step 2: Enter the combination’s initial digit.
- Step 3: Enter the combination’s second digit.
- Step 4: Enter the combination’s third digit.
- Step 5: Enter the combination’s fourth digit.
- Step 6: Unshackle the bind.
How do you open a 4 digit lock?
How to Open a 4 Number Combination Lock
- Look for your combination number.
- Set the first digit of the combination.
- Set the second digit of the combination.
- Set the third digit of the combination.
- Set the fourth digit of the combination.
- Pull the shackle to unlock.
What is the door code?
Your door code is a numeric code stored on the locks of the units you have access to. If you enter this code on the keypad of a lock that belongs to a unit you have access to, the lock will unlock.
How do you program a door lock?
- #1: Make sure that the door is open and unlocked.
- #2: Enter the programming code.
- #3: Press the lock button.
- #4: Press the “3” button.
- #5: Press the lock button.
- #6: Enter the access code you want to change.
- #7: Press the lock button.
- #8: Re-enter the programming code.