Can Compound Bow Be adjust draw weight?
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.
How do you lower the draw weight on a compound bow?
To raise draw weight to maximum poundage, tighten the limb bolts (clockwise) until both limbs are tight against the riser. To lower the draw weight we unscrew the limb bolts equally on each limb (counterclockwise).
How do you adjust the draw length on a Parker bow?
Locate the bow limb bolts. These are located at both bow ends, just above the cams, and are recognizable by their 3/16-inch Allen key screw-heads. Use the Allen key to turn each bolt counter-clockwise to decrease the draw weight. Each full turn of the screw will decrease the weight two to three pounds.
Can you adjust the draw length on a compound bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How do I know my draw weight for a compound bow?
The standard for determining their draw weight is taken at 28 inches of draw length. The draw weight is marked on the bow’s lower limb with the pound sign (#),such as 35# @ 28”. That translates to 35 pounds of draw weight at a 28-inch draw length.
How do you adjust the draw weight on a Parker bow?
How to Adjust the Draw Weight on a Parker Bow. Locate the bow limb bolts. These are located at both bow ends, just above the cams, and are recognizable by their 3/16-inch Allen key screw-heads. Use the Allen key to turn each bolt counter-clockwise to decrease the draw weight. Each full turn of the screw will decrease the weight two to three pounds.
How to increase draw weight on a compound bow?
This stress is the flex amount of the bow and we are precisely doing that by tightening or loosening the bolts on each limb of your compound bow thus giving you an increased or decreased draw weight. How To Raise Draw Weight To Maximum Poundage.
What is a Parker compound bow?
Parker Compound Bows Inc. is the largest producer of crossbows and compound bow archery equipment in the world. Parker makes a large assortment of compound bow models, each with specific draw weights to suit the preference of the any would-be hunter or archer.
How do I adjust the draw weight on my limb bolts?
Tighten the limb bolts until the limbs are tight to the riser. First, raise the drawing weight to its max. Next, unscrew both limb bolts one revolution (360°) and check the poundage on a bow scale. Repeat this process until you reach your desired draw weight. Only attempt to shoot draw weights in the limb’s specified range (50-60 lbs, 60-70 lbs).