How do you attach track curtains?

Table of Contents

For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole. Just make sure you insert the hooks into the pockets rather than onto the cords!

How do you fix a corded curtain track?

How to Fit New Cord to Curtain Tracks

Remove the Hooks.
Take the Measurements.
Extract the Old Cord.
Slide and Pull.
Insert and Feed.
Pull and Loop.
Re-hang the Curtain Rod.
Finish and Test Your Curtain Cord Replacement.

How do corded curtain tracks work?

Corded curtain tracks, they do what they say on the tin. The have a cord to the side of the track which you pull to open and close the curtains. This cord should always be secured to the wall and a minimum of 1.5m from the ground – this will ensure that a child will not be able to get entangled in the cord.

How do you attach curtain rings and hooks?

Put up Curtains: Slide the rod into the brackets and add the rings onto the rod (if using). Attach drapery hooks to each pleat of the curtain & each end of the curtain (if needed). Then slide the curtains onto the rod (pocket style curtains) or hook the curtains to the rings (pleated style curtains).

How do you fix a pulley on a curtain?

Unscrew the brackets that hold the rod in place and take the rod down. Pull the cord from the rod, cutting it free from any tangles. Place the rod with the hardware facing up and feed the new cord under the top pulley on the left end of the rod. Maneuver the new cord into the rod’s track and through the opening.

How do you fix a stuck curtain track?

The cure for sticking curtains is usually very simple. For most situations simply applying a quality dry silicone spray to the track or pole will ensure a perfect gliding action.

How do you attach drapery hooks to curtains?

They are easy, cheap, and allow the curtains to easily slide along the rod….HOW TO GET THE LOOK

CHOOSE YOUR CURTAINS.
PICK YOUR SPACING AND LAYOUT WHERE YOUR PINS WILL GO WITH A PENCIL.
INSERT DRAPERY PINS.
USE PLIERS TO CLOSE THE EYELETS TOGETHER ON THE RING CLIPS.
HANG THE CURTAIN ON THE ROD.

What is the length of a Supreme cord curtain track?

How to install curtain track on curtains?

Once all the brackets are in place, you can fit the curtain track. In some cases, the curtain track will just lie on the brackets but in others, it will need to be secured. Ensure the curtain track is centered on the brackets. There will be a hole on the bottom part of the bracket where the curtain track sits on it.

What is the length of Swish curtain tracks?

Here we have fitting instructions for supreme cord high quality aluminium corded tracks lengths 150cm to 500cm. Here we have the fitting instructions for Swish superluxe curtain tracks lengths 125cm to 500cm. Here we have fitting instructions for Swish deluxe curtain tracks lengths 125cm to 275cm.

What do you need to install a new curtain cord?

You’ll have to know the ins and outs of fitting a new cord to the curtain tracks. It’s a process that requires close attention to instructions and the right tools: A tape measure, scissors, a ladder or chair and, of course, a curtain cord.