How much horsepower does a 3100 V6 have?
| Engine manufacturer: | GM 3100 V-6 |
|---|---|
| Horsepower net: | 126.5 kW / 172 PS / 170 hp (SAE net) |
| / 4800 | |
| Torque net: | 264 Nm / 195 ft-lb |
| / 4000 |
How much horsepower does a 3.1 V6 have?
Performance. This engine can produce 140 horsepower at 4,800 revolutions per minute and 180 foot-pounds of torque at 3,600 rpm.
What is a 3100 motor?
The 3100 SFI (Sequential Fuel Injection) V-6 engine made by General Motors between 1993 and 2003 was a popular engine. These cars like Chevrolet Malibu, Pontiac Grand Prix and Oldsmobile Cutlass Supreme, powered by this engine, featured in those years.
How much HP does a 2.8 V6 have?
Original Chevy 2.8 Specs Original 2.8 V-6 engines with a 3.5-inch bore and 3.0-inch stroke produced 135 maximum horsepower at 4,900 rpm and 135 foot-pounds of torque at 3,900 rpm.
What cars had the 3100?
General Motors produced the 3100 SFI (Sequential Fuel Injection) V-6 engine for its cars from 1993 to 2003. Cars powered by this engine during those years included the Chevrolet Malibu, Pontiac Grand Prix and the Oldsmobile Cutlass Supreme.
What is an SFI engine?
Essentially, sequential fuel injection (sfi) occurs when an inline engine and throttle body pass. Air and fuel flow through the system together at speeds that range from high speed to slow. Multi port Injection inj is a unit in which every cylinder has an engine compartment separate from the port-injectable.
What is an L32 engine?
The L32 is a supercharged Series III. Introduced in 2004, the main differences between the L67 and the L32 are the L32’s electronic throttle control, slightly improved cylinder head design, and updated Eaton supercharger, the Generation 5 M90. Power output is up to 260 hp (194 kW) in the Grand Prix GTP.
What is an L82?
The L82 is a 5.3 liter, eight-cylinder engine from General Motors used in pickup trucks. Featuring an OverHead Valve (OHV), or “push-rod” design” in a “V” configuration, the L82 is part of GM’s Gen V Small Block engine architecture that’s known in trucks and SUVs as EcoTec3.
What cars have the 3400 engine?
3.4/3400
- Pontiac Grand Am.
- Oldsmobile Alero.
What does MFI mean on engine?
Multi-Port Fuel Injection
Multi-Port Fuel Injection (MFI) System.
What size engine is a 2.8 liter?
Engine Size Chart
| Liters (L) | Cubic Centimeters (CC) | Cubic Inches (CID) |
|---|---|---|
| 2.8 | 2,786 | 170 |
| 2.8 | 2,803 | 171 |
| 2.8 | 2,835 | 173 |
| 3.0 | 2,967 | 181 |
How much horsepower does a 4.3 V6 Vortec have?
4.3L Vortec 4300 Engine Specs
| 4.3L Vortec V6 Engine Specs | LU3 | EcoTec3 LV3 |
|---|---|---|
| Horsepower: | 195 hp @ 4600 RPM | 285 hp @ 5300 RPM |
| Torque: | 260 lb.-ft. @ 2800 RPM | 305 lb.-ft. @ 3900 RPM |
| Bore and Stroke (in / mm): | 4 x 3.48 / 101.6 x 88.4 | 3.92 x 3.62 / 99.6 x 92 |
| Compression Ratio: | 9.2:1 | 11.0:1 |
What kind of engine does a 3100 SFI engine have?
Information on a 3100 SFI V6 Engine. General Motors produced the 3100 SFI (Sequential Fuel Injection) V-6 engine for its cars from 1993 to 2003. Cars powered by this engine during those years included the Chevrolet Malibu, Pontiac Grand Prix and the Oldsmobile Cutlass Supreme.
What transmission does a GMC Sierra 3100 have?
Compatibility and Performance. GM matched the 3100 to a four-speed 4T65E automatic transmission with a first gear ratio of 2.92-to-1, second 1.57-to-1, 1.00-to-1 third and 0.71-to-1 fourth. When new, the engine was rated at 20 mpg in city driving and 30 mpg on country roads.
What is the wheelbase of a 1953 Chevy model 3100?
These are standard specifications – not necessarily specifications for the vehicle (s) in the photo (s). The 1953 Chevrolet Model 3100 has a wheelbase size of 116.00 inches.