How much torque does a DT466 have?

The highest powered DT466 engine produces 260 horsepower and 800 pound-feet of torque. All horsepower peaks listed are at 2,300 rpm and torque peaks at 1,400 rpm.

How much horsepower and torque does a DT466 have?

International DT466 Specs

Manufacturer Navistar International *
Engine Weight 1,425+ lbs
B50 Life 550,000 miles
Horsepower Up to 300hp @ 2,200 rpm
Torque (lb-ft) Up to 860 lb-ft @ 1,300 rpm

How much power can you get out of a DT466?

3,000 hp
The engine can crank out more than 3,000 hp and can be spun to an insane 7,500 rpm.

Is the DT466 a good motor?

DT466 vs 5.9L Cummins Life Expectancy The DT466/DT466E diesel engines were given a life expectancy of 350,000 miles, but with proper maintenance, engine life could extend up to 550,000 miles. Some school bus mechanics claim to have run their DT466-equipped buses for 700,000 miles before requiring an engine rebuild.

How much horsepower can you get out of a DT466?

How much horsepower does a CAT 3126 have?

300 hp @
3116 & 3216 Engine Specs

Engine variations Production Years Horsepower
CAT 3126 CAT 3126B CAT 3126E 1997 to 1998 1998 to 2001 2002 to 2004 Minimum: 175 hp @ 2400 RPM Maximum: 300 hp @ 2200 RPM

What is the difference between a dt466 and a dt466e?

The computer and accompanying harnesses are needed to operate it properly. Without the “E” simply means it’s an older engine, usually 1996 or older, and entirely mechanical in it’s operation with no electronic controls at all. Both are good.

How many horsepower is a DT530?

International DT530 Engine – 275 HP.

How many liters is a International 466?

7.6 L
Electronic injection Variants

Navistar DT466E
Displacement 466 cu in (7.6 L)
Cylinder bore 4.59 in (116.6 mm)
Piston stroke 4.68 in (118.9 mm)

What is the torque on a DT466 engine?

IH International Navistar DT466 engine Bolt Tightening Torques IH 466 Main Bearing Bolts step 1 = 136 Nm, 100 lb.ft step 2 = 177 Nm, 130 lb.ft

What are the specs of a IH 466 DT diesel engine?

International IH 466DT, MAXXFORCE DT, Diesel Engine Specs. IH 466DT, MAXXFORCE DT, engine Displacement, Bore and Stroke Displacement – 7.6 liter, 466 CID Bore – 116.59 mm, 4.59 in Stroke – 118.87 mm, 4.68 in Click for IH DT466 engine manuals and specs.

What are the specs for the Navistar International DT466 diesel?

Specs for the Navistar International DT466 7.6L diesel are as follows: Manufacturer Navistar International * Engine Name DT466, DT466E, MaxxForce DT Displacement 7.6L, 466 cubic inches Configuration Inline-6 turbocharged Head/Block Material Cast Iron

How many years has the International DT466 been in production?

Uses for the International DT466 are wide, though. With its 40+ years in production the engine has seen its fair share of uses. Anyways, there’s a lot to unpack with this legendary engine so we’ll jump right in.