Is Dana 60 better than 14-bolt?
Larger Ring Gears The Dana 60 ring gear is 9.75″ in diameter, and semi-float 14 bolt axles have a 9.5″ ring gear. Because they have larger ring gears, the pinion on 14-bolt full float axles and Dana 70s is less likely to be damaged than the pinion on a Dana 60 or 14-bolt semi-float.
Is a GM 14-bolt good?
GM’s Strong & Plentiful Axle When it comes to strength, value, and vast availability, the full-float 14-bolt rear axle from General Motors is about as good as it gets.
Is a 14-bolt A 1 ton axle?
The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks Every diesel-powered pickup sold in the United States for the last 10 years has a full-floating rear axle.
How strong is a GM 14-bolt?
The Corporate 14 bolt uses a 10.25″ ring gear and unique pinion bearing design such that the pinion shaft is supported from the front and rear. It is GM’s 1 ton axle and carries a GAWR up to 8,600 lbs. There are not a lot of variations of this axle, which makes it simple to source and build a 14 bolt rear end.
How much torque can a Dana 60 handle?
5,500 lb-ft.
Both versions have a torque output rating of 5,500 lb-ft. The Dana 60’s ring gear is 9.75 inches in diameter, and the available gear spread ranges from 3.31:1 to 7.17:1.
Is the Dana 60 a good axle?
Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.
How strong is a Dana 60 rear end?
The Dana 60 can easily handle drivetrains producing 600 horsepower, and is commonly accepted as the strongest passenger car axle you can find. The Dana 60 is also quite adaptable. Just about any ring and pinion combination you want between 3.54:1 and 7.17:1 is still readily available.
How much horsepower can a Dana 60 handle?
Additionally, the Dana 60 (S60) from Strange comes equipped with their beefy 35-spline alloy axles and carrier that can handle over 1,000 horsepower. A vintage Dana 60 like ours with its stock 23-spline axles and clutch-type Sure-Grip is limited to roughly 700 horsepower of sticky tire, strip action.
How much HP can a Dana 60 handle?
Is a Dana 60 a good rear end?
If you want a big brute of a rear end under your car, look no further than a Dana 60. Even in the heyday of muscle cars, Dana 60 rear differentials were renowned for their strength, along with their difficulty to locate. Today, they’re actually incredibly easy to find.
How much weight can a Dana 60 handle?
Dana 60 rear axle Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs. Full floating variants are common while Semi-floating axles exist, but are less common.
What is the difference between a Dana 60 and 14 bolt?
The Dana 60 ring gear is 9.75″ in diameter, and semi-float 14 bolt axles have a 9.5″ ring gear. Because they have larger ring gears, the pinion on 14-bolt full float axles and Dana 70s is less likely to be damaged than the pinion on a Dana 60 or 14-bolt semi-float.
How much does a Dana 60 axle weigh?
The typical 14 bolt axle weighs about 550 pounds. Since there are many different variations of Dana 60 and 70 axles, we can’t give those axles a certain weight. However, a rear Dana 60 axle usually weighs about 400 pounds, a front Dana 60 will weigh about 500 lbs, and the Dana 70 is similar in weight to the 14 bolt.
What is the gear ratio for a Dana 60?
Dana 60 factory ratios: 3.54:1 to 7.17:1 There’s a pretty wide variety in ratios, which is good and bad. Good, it that there are a lot of options available to you if you’re planning to upgrade. Bad, in that it can be hard to find a used axle with the “right” gear ratio.
What is the torque of a Dana 70 axle shaft?
The torque rating for a stock Dana 70 axle shaft is 8966 ft/lbs, which is almost 50% stronger than the stock Dana 60 axle shaft, which has a rating of 6044 ft/lbs. NOTE: You may be surprised at how high those torque ratings are as compared to the torque your engine puts out.