What does F4 mean on a washing machine?

The error codes F4, F21, and FP indicate an issue with the water drain. The drain hose or filter could be clogged. Make sure there is no kink or clog in the hose blocking the water.

Why is my Gorenje washing machine not spinning?

This error code indicates a problem with not spinning. This is often due to the carbon brushes have worn out – and can affect the drum not turning. Other components that need to be checked include the motor tachometer, wiring and connections to the main drive motor, and between the inverter card and the motor.

What does F4 mean on Gorenje washing machine?

If your washing machine is showing on your digital display or LED display an error code F4, or F8, this means you have a motor tacho not detected or no motor action, you need to check these: the motor tachometer. the wiring and connections to the motor and PCB. the motor carbon brushes.

Can you reset washing machine?

If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.

Why won’t my washing machine drum go round?

Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.

Does a washing machine have a reset button?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.

Is it possible to reset a washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.